Cylinder Head Bolt Release Sequence; Camshaft Drive Chain Tensioner Rubbing Blade - Triumph Scrambler 1200 XC Service Manual

3. Remove the cylinder head bolts, retain the washers and discard the cylinder head
bolts.
Note
If necessary, lightly tap the cylinder head with a soft-faced mallet to break the
gasket seal.
4. Remove the cylinder head from the crankcase.
5. Remove and discard the cylinder head gasket.
Note
Note the position of the camshaft drive chain rubbing blade upper mounting for
installation.
6. Lift the camshaft drive chain tensioner rubbing blade out of the crankcase.
Service Manual - Scrambler 1200 XC
7
1
cja m_4

Cylinder Head Bolt Release Sequence

cftg
1.

Camshaft drive chain tensioner rubbing blade

3
1
2
5
196 of 640