Latest Calibrations Check; Fasteners - General Inspection - Triumph Scrambler 1200 XC Service Manual

Use of a motorcycle with bank angle indicators worn beyond the maximum limit
will allow the motorcycle to be banked to an unsafe angle. Therefore, always
replace the bank angle indicator pegs when they are worn down to the wear
indicator groove.
Banking to an unsafe angle may cause instability, loss of motorcycle control and
an accident.
The bank angle pegs must not be used as a guide to how far the motorcycle may
be safely banked. This depends on many various conditions including, but not
limited to, road surface, tyre condition and weather. Banking to an unsafe angle
will lead to loss of motorcycle control and an accident.

Latest Calibrations Check

Before starting work, ensure the motorcycle is stabilised and adequately
supported. This will help prevent it from falling and causing injury to the operator
or damage to the motorcycle.
Check for the latest calibration download for the following using the Triumph
Diagnostic Tool:
Instruments (If applicable)
Chassis ECM (if fitted)
Keyless ECM (if fitted)
Engine ECM
See the Triumph Diagnostic Tool User Guide for more information.

Fasteners - General Inspection

Service Manual - Scrambler 1200 XC
1. Bank angle indicator
2. Wear indicator groove
WARNING
WARNING
WARNING
WARNING
127 of 640