Triumph Scrambler 1200 XC Service Manual page 540

Before starting work, ensure the motorcycle is stabilised and adequately
supported. This will help prevent it from falling and causing injury to the operator
or damage to the motorcycle.
1. Align the twist grip to the twist grip position sensor as noted for removal.
2. Fit the twist grip clamp. Ensure the locating lug fits into its hole on the handlebar.
3. Fit the fixings and tighten, upper one first, to 2.5 Nm.
4. Refit the right hand handlebar end weight and spacer. Tighten the new fixing to 5
Nm.
Service Manual - Scrambler 1200 XC
3
L0421
1. Locating lug
2. Hole
3. Twist grip clamp
4
WARNING
1
2
2
1
540 of 640