Throttle Body Plate (Butterfly) - Check/Clean; Fuel/Evaporative System - Check For Leaks, Routing, Chafing, Security - Triumph Scrambler 1200 XC Service Manual

3. Secure the fuel filter to the fuel pump bracket with two new cable ties.
4. Connect the fuel pump hose to the fuel filter and secure with the hose clip.
5. Refit the fuel pump securing bolt and strap and tighten the bolt to 4 Nm.
6. Refit the hose bracket to the fuel pump bracket and tighten its fixing to 7 Nm.
7. Carefully refit the baffle material into the front of the baffle housing.
8. Refit the baffle housing to the fuel pump as noted for removal.
Perform the following operations:
Fuel Pump Assembly - Installation

Throttle Body Plate (butterfly) - check/clean

Before starting work, ensure the motorcycle is stabilised and adequately
supported. This will help prevent it from falling and causing injury to the operator
or damage to the motorcycle.
Perform the following operations:
Throttle Body and Inlet Manifold Assembly - Removal
1. Using a lint free cloth and a suitable degreaser such as Castrol Motorcycle Parts
Cleaner, remove any residue from the internal surfaces and throttle plate
(butterfly).
2. Check for any signs of damage and ensure the butterfly moves correctly.
Perform the following operations:
Throttle Body and Inlet Manifold Assembly - Installation
Fuel/Evaporative System - Check For Leaks, Routing, Chafing and
Security
Standard required:
Fuel/evaporative hoses must be secure and routed in such a way that they do not
chafe against moving parts of the motorcycle.
Fuel/evaporative hoses must not be routed around sharp curves. This could cause
restrictions in the flow of fuel.
Service Manual - Scrambler 1200 XC
cevu
1. Fork
2. Isolator feet
WARNING
92 of 640