Fuel Pump Plate Tightening Sequence - Triumph Scrambler 1200 XC Service Manual

3. Refit the fuel pump assembly to the fuel tank. Fit and tighten the fixings to 5 Nm in
the sequence shown below.
4. Refit the fuel tank (see Fuel Tank - Installation).
5. Refill the fuel tank with the fuel drained during removal, and check carefully for
fuel leaks.
Perform the following operations:
Battery - Installation
Seat - Installation
Perform the following operations:
Fuel Pump Assembly - Removal
1. Remove and discard the circlip securing the fuel pressure regulator in its
housing.
Service Manual - Scrambler 1200 XC
2. Baffle hose
3. Fuel pump harness
4. Fuel level sensor connector
3
5
7
9
2
L0137

Fuel Pump Plate Tightening Sequence

1
10
8
6
4
1
507 of 640