Triumph Scrambler 1200 XC Service Manual page 583

Hide thumbs Also See for Scrambler 1200 XC:

Table of Contents

Retighten the header pipe lower nut to 19 Nm.

Installation Continued

Position the exhaust header to catalytic converter clamp as noted for removal and

tighten to 10 Nm.

Route the oxygen sensor harness as noted for removal and connect to the main

harness as noted for removal.

Fit the connector bracket to the right hand side of the headstock and tighten its

fixing to 3 Nm.

Perform the following operations:

Fuel Tank - Installation

Battery - Installation

Seat - Installation

Start the engine and check for exhaust gas leaks. Rectify if necessary.

Before starting work, ensure the motorcycle is stabilised and adequately

supported. This will help prevent it from falling and causing injury to the operator

or damage to the motorcycle.

Service Manual - Scrambler 1200 XC

Connector bracket