Connecting Rod - Installation - Triumph Scrambler 1200 XC Service Manual

Perform the following operations:
Fuel Tank - Installation
Battery - Installation
Seat - Installation
Note
The connecting rods and caps are etch-marked on one side to identify their
correct orientation. However, the cylinder from which they are individually
removed should also be identified, using a paint marker or similar.
Engine - Removal
Clutch - Removal
Barrels - Removal
Crankcase - Disassembly
Remove and discard the connecting rod bolts.
1. Collect the connecting rod caps.
2. Collect the piston and connecting rod.
3. Label the assembly to identify the cylinder from which it was removed.

Connecting Rod - Installation

Note
Service Manual - Scrambler 1200 XC
1
ciyh
1. Connecting rod bolts
2. Connecting rod cap
3. Connecting rod
2
3
254 of 640