The above illustration shows the pin numbering system used in the engine
management circuit diagram.
The smaller connector's pins are prefixed A and the larger connector pins B. As
viewed on the mating face with the ECM (as per the illustration), pins are numbered
from right to left with number one in the top right corner.
System Diagnostic Tool Connection
Diagnostic T ool Connection
1.
To connect the Triumph diagnostic interface to the motorcycle, remove the left
hand side panel (see Side Panels) and release the diagnostic connector from its
locating tang.
2.
Plug the Triumph diagnostic interface directly into the diagnostic connector.
Service Manual - Scrambler 1200 XC
1
1.
Diagnostic connector
400 of 640