Triumph Scrambler 1200 XC Service Manual page 574

Before starting work, ensure the motorcycle is stabilised and adequately
supported. This will help prevent it from falling and causing injury to the operator
or damage to the motorcycle.
1. Check rubber mountings for cracks and wear, replace if necessary.
2. Fit the rubber bushes and shouldered washers to the silencers rear mounting as
noted for removal.
3. Fit new exhaust silencer gaskets to the catalytic converter, ensure they are
positioned up to the collar.
4. Fit the two rubber bushes and the shouldered washer to the lower mounting as
noted for removal
5. Position the exhaust clamps onto the silencer.
6. Position the silencer assembly onto the catalytic converter.
7. Fit the lower mounting fixing, do not fully tighten at this stage.
Service Manual - Scrambler 1200 XC
1
2
1. Exhaust gaskets
2. Collar
3. Catalytic converter
WARNING
2
3
2
3
574 of 640