Triumph Scrambler 1200 XC Service Manual page 462

Test
2 Check cable and terminal
integrity:
- ECM pin A33
- ECM pin A34
- ABS modulator pin 2
- ABS modulator pin 4
- ABS modulator pin 10
- ABS modulator pin 11
- ABS modulator pin 18
3 Check cable for short circuit:
- ECM pin A33 to ground
- ECM pin A34 to ground
4 Check cable for short circuit:
- ABS pin 2 to ground
- ABS pin 11 to ground
5 Check cable continuity:
- ECM pin A33 to ABS pin 2
- ECM pin A34 to ABS pin 11
- ABS pin 10 to ground
- Fuse box Fuse 5 to ABS pin 18
- Fuse box Fuse 7 to ABS pin 4
6 Reconnect harness, clear fault
code and run engine.
Circuit Diagram
Service Manual - Scrambler 1200 XC
Result Action
OK Disconnect the engine ECM
and proceed to test 3
Faulty Rectify fault, proceed to test 6
OK Disconnect ABS modulator
and proceed to test 4
Faulty Locate and rectify wiring fault,
proceed to test 6
OK Proceed to test 5
Faulty Locate and rectify wiring fault,
replace relevant fuse,
proceed to test 6
OK Proceed to test 6
Fault still Locate and rectify wiring fault,
present proceed to test 6
OK Action complete - quit test
Fault still Contact Triumph service
present
462 of 640