Twist Grip Position Sensor Electrical Connector - Triumph Scrambler 1200 XC Service Manual

4. Slide the twist grip position sensor off the handlebar.
Before starting work, ensure the motorcycle is stabilised and adequately
supported. This will help prevent it from falling and causing injury to the operator
or damage to the motorcycle.
1. Slide the twist grip position sensor onto the handlebar in the orientation noted for
removal.
2. Route the twist grip harness to the main harness as noted for removal.
3. Connect the twist grip position sensor electrical connector to the main harness.
4. Position the harnesses to the headstock tidy as noted for removal. Fit the
headstock centre cover and tighten the M5 fixing to 5 Nm and the M4 fixing to 3
Nm.
Service Manual - Scrambler 1200 XC
L0913
1.

Twist grip position sensor electrical connector

1
L0913
1. Twist grip position sensor electrical connector
WARNING
543 of 640