Triumph Scrambler 1200 XC Service Manual page 232

2. Place the assembled clutch pack on a flat surface and measure its height as
shown below.
3. The clutch pack height for this clutch assembly is shown in the specification table
see Clutch and Primary Drive.
4. If the clutch pack is too high, continue from step 5, omit step 6 then continue from
step 7. If the clutch pack is too low, continue from step 6.
Note
1.6 mm and 2.3 mm steel plates are available, refer to the Parts Catalogue for
part numbers.
Service Manual - Scrambler 1200 XC
1. Outer friction plates
2. Friction plates
3. Inner friction plate
4. Steel plate, 2.0 mm thickness
5. Outer steel plate, 2.0 mm thickness
1
T0943_1
1. Clutch pack height
232 of 640