Starter Drive/Sprag Clutch - Inspection; Starter Drive/Sprag Clutch - Installation - Triumph Scrambler 1200 XC Service Manual

Starter Drive/Sprag Clutch - Inspection

1. Check the sprag clutch bearings for overheating, wear and/or non-smooth
operation. Replace the sprag clutch if overheating, wear and/or non-smooth
operation is found.
2. Examine all gears for chipped teeth and for any other damage.
3. With the sprag clutch mounted in the housing, check the sprag clutch for smooth,
free movement in one direction only (as indicated by the arrow marked on the
sprag clutch body).

Starter Drive/Sprag Clutch - Installation

1. Locate the sprag clutch to the sprag clutch housing as shown below. Push firmly
until the lip seats in the recess provided in the housing.
2. Fit the starter sprag gear to the sprag clutch.
3. Lubricate the crankshaft bearing with engine oil.
Service Manual - Scrambler 1200 XC
1. Sprag clutch housing
2. Sprag clutch
1. Sprag clutch housing
2. Sprag clutch
2
1
329 of 640