Before starting work, ensure the motorcycle is stabilised and adequately
supported. This will help prevent it from falling and causing injury to the operator
or damage to the motorcycle.
1.
Connect the hoses to the purge control valve as noted during removal.
2.
Connect the electrical connector to the purge control valve.
3.
Position the purge control valve to its mounting bracket and tighten the fixing to 3
Nm.
Service Manual - Scrambler 1200 XC
L0918
1.
Purge valve
2.
Hose (from evaporative cannister)
3.
Hose (to inlet manifold)
2
L0918
1.
Purge valve
2.
Hose (from evaporative cannister)
3.
Hose (to inlet manifold)
WARNING
3
1
594 of 640