3.
Collect the washer from the gear change shaft.
4.
Withdraw the gear change shaft as an assembly.
Gear Change Shaft - Inspection
1.
Inspect the gear change shaft assembly and spring for damage or wear, the
springs for overextension (i.e. abnormal gaps between coils). If any of the
components are damaged or worn, replace the complete assembly.
Gear Change Shaft - Installation
Before starting work, ensure the motorcycle is stabilised and adequately
supported. This will help prevent it from falling and causing injury to the operator
or damage to the motorcycle.
1.
Position the selector mechanism into the crankcase and locate the pivot plate to
the detent wheel.
Service Manual - Scrambler 1200 XC
1
cjcc
1.
Gear change shaft assembly
2.
Washer
2
WARNING
2
294 of 640