Triumph Scrambler 1200 XC Service Manual page 604

Note
Do not exceed 1.2 bar when carrying out a coolant pressure test.
5. Pressurise the cooling system to the operating pressure, using the hand pump,
taking care not to exceed 1.2 bar.
6. Hold the pressure for a minimum of 10 minutes, whilst visually inspecting the
external components of the coolant system for leaks.
Note
If the engine oil is contaminated further exploratory investigation will be
required.
Engine oil with a hazy or milky appearance may indicate water emulsion.
If the engine oil is contaminated rectify the cause of the problem and then
renew the oil and filter.
7. Remove the engine oil filler cap and check for contamination of the engine oil
caused by coolant escaping into the engine sump.
8. De-pressurise the coolant test kit using the pressure release valve.
Service Manual - Scrambler 1200 XC
2. T3880147 - Radiator and Cap Tester Kit
3. Hand held pump (part of T3880147 - Radiator and
Cap Tester Kit)
3
cjhr_1
1. Coolant filler neck
2. Bayonet type connector
3. Hand held pump
4. Pressure release valve
4
2
1
604 of 640