Triumph Scrambler 1200 XC Service Manual page 319

20. Fit the roller bearing to the output shaft as noted during disassembly.
21. Retain the roller bearing using a new circlip.
22. Lubricate the bearing with oil and then slide the bearing outer roller carrier over
the needle roller bearing in the orientation noted during disassembly.
Service Manual - Scrambler 1200 XC
cjgh_2
1. Thrust washer
2. First gear
3. Needle roller bearing
4. Output shaft
T908.07.27
1. Circlip
2. Needle roller bearing
3. Thrust washer
4
1
2
3
319 of 640