Camshaft - Removal - Triumph Scrambler 1200 XC Service Manual

Hide thumbs Also See for Scrambler 1200 XC:
Table of Contents

Advertisement

Note
The decompressor is an integral part of the camshaft. Any internal parts are
not serviceable and can only be replaced as part of the camshaft. Always refer
to the EPC for parts availability.

Camshaft - Removal

Before starting work, ensure the motorcycle is stabilised and adequately
supported. This will help prevent it from falling and causing injury to the operator
or damage to the motorcycle.
Note
The camshaft can be removed from the cylinder head without complete
removal of the camshaft drive chain. However, the camshaft drive chain must
first be detached from the camshaft.
Perform the following operations:
Seat - Removal
Battery - Removal
Fuel Tank - Removal
Ignition Coils - Removal
Camshaft Cover - Removal
Alternator Cover - Removal
1.
Rotate the engine until T3880601 - Camshaft Timing Pin can be inserted through
the hole in the alternator rotor, crankcase and into the idler gear.
Service Manual - Scrambler 1200 XC
civb
WARNING
178 of 640

Advertisement

Table of Contents
loading

Table of Contents