Triumph Scrambler 1200 XC Service Manual page 84

The oil may be hot to the touch. Contact with hot oil may cause the skin to be
scalded or burned.
3. Remove the oil drain plug and discard the sealing washer.
4. Remove the oil filler plug and discard the sealing washer.
5. With the motorcycle on level ground, and on its side stand, allow the oil to
completely drain.
6. Unscrew and remove the oil filter using T3880313 - Oil Filter Wrench.
7. Dispose of the old filter in an environmentally friendly way.
8. Apply a smear of clean engine oil to the sealing ring of the new oil filter.
9. Using T3880313 - Oil Filter Wrench, fit the new oil filter and tighten to 10 Nm.
10. Fit a new sealing washer to the drain plug.
11. Fit and tighten the drain plug to 25 Nm.
12. Using a suitable funnel, fill the engine with new semi or fully synthetic 10W/40 or
10W/50 motorcycle engine oil which meets specification API SH (or higher) and
JASO MA, such as Castrol Power 1 Racing 4T, sold as Castrol Power RS Racing
4T in some countries.
13. Fit a new sealing washer to the oil filler cap.
14. Fit and tighten the oil filler plug to 3 Nm.
Service Manual - Scrambler 1200 XC
cjkf
1. Oil drain plug
2. Oil filter
WARNING
1
2
84 of 640