Triumph Scrambler 1200 XC Service Manual page 271

Note
The front dead shaft clamp is marked with the F facing away from the
crankcase.
4. Loosen but do not fully remove the dead shaft clamp locking screw.
5. Remove the dead shaft clamp securing screw and washer. Discard the screw,
retain the washer for reuse.
6. Support the balancer shaft and noting its orientation slide the dead shaft from the
crankcase.
Service Manual - Scrambler 1200 XC
1. Blanking screw
2. Washer
3. Upper crankcase
ciza
1. Dead shaft clamp
2. Locking screw
3. Securing screw
4. Washer
5. Dead shaft
4
3
1
2
5
1
271 of 640