Alarm; Motion - EverFocus VANGUARD 4x2H User Manual

4.3 Alarm

You can configure the alarm settings on this page.
4.3.1

Motion

After configuring the Motion Detection settings, you can further configure the Motion Alarm
settings. To configure the Motion Detection setting, click the Motion button or click Setup >
Channel > Motion to enter the Motion Detection setup page (please refer to 4.1.5 Motion).
Channel: Displays the channel number.
Buzzer: Select a time for DVR buzzer to sound when a motion event is triggered. Select
Disable to disable the function.
Alarm Out: Check the box to enable the connected external alarm output device.
Latch Time: Select an alarm output time (duration) when events occur. When an event is
triggered, the alarm will last based on the setup latch time.
Record: Click and select the desired channel(s) you want to record when a motion event is
triggered on this channel. Note that for recording function to work, the Record Schedule
function has to be configured (please refer to 4.2.2.2 Record Schedule).
Post Recording: Select a post recording time when a motion event is triggered.
Show Message: Check the box to display the motion icon
motion event is triggered.
H.265 VANGUARD 4x2H / 8x4H / 16x8H
on the live channel when a
101