Alarm - EverFocus ECOR Series Instruction Manual

( (
Figure 5.12 is a screen shot of the '
alarm and event setup.
( (
' 6 Check box to record alarm events in the log.
N.O.: Normal Open contact.
N.C.: Normal Close contact.
external motion detector on camera one you would set this option to "1".
D
move the camera to a preset position for event recording. This function can improve surveillance quality of
an alarm event.
or "2" (output signal 1 transmits).
Downloaded from www.Manualslib.com
' <
0
6 Select the alarm number.
% 6 Check box to enable alarm.
6 This field is to change the type of alarm trigger.
6 Assign a name for the alarm input.
( 6 This field is for assigning the alarm to a specific camera. For example if you had an
6 Select PTZ Preset from "0" to "255". If the Active Camera is a PTZ speed dome, the alarm will
6 This will transmit a signal to another device. It can be set to either "
manuals search engine
$ $#
$ @ ? $
Figure 5.12 (Alarm & Event Menu 1 Alarm)
42
5. This menu will walk you through
" (not activated)