Motion Detection Setup; 1>Motion Det Camera Select; 2>Motion Det Sensitivity; 3>Video Loss Camera Select - EverFocus DHV-410M Installation & User Manual

1.8> MOTION DETECTION SETUP
> MOTION DET CAMERA SELECT
MOTION DET CAMERA SENSITIVITY
VIDEO LOSS CAMERA SELECT
VIDEO LOSS ALARM
1.8.1> MOTION DET CAMERA SELECT
To select cameras to enter or exit motion detection mode.
All options can be completed in rotation by pressing the SELECT button.
¡ ½
User can also press the following buttons to complete the selection.
¡ ½
1.8.2> MOTION DET SENSITIVITY
Select the sensitivities of motion detection. There are three sensitivity levels
selectable - HIGH, NORMAL and LOW.
1.8.3> VIDEO LOSS CAMERA SELECT
To select cameras to enter or exit Video Loss Detection Mode.
All options can be completed in rotation by pressing the SELECT button.
¡ ½
User can also press the following buttons to complete the selection.
¡ ½
1.8.4> VIDEO LOSS ALARM
ON: Under Video Loss Alarm mode, the DVR beeps when one or all of the 4
Channels lose the video signal.
OFF: No beeping.
MOTION DET SETUP
10
1 2 3 4
LOW
1 2 3 4
ON
Version 1.2