Motion - EverFocus H.265 VANGUARD II Series User Manual

4.1.6

Motion

You can configure the motion settings and motion event notifications on this page. You can
also enable the Push Notification function to send motion event alerts to your mobile devices
(with eFVMS App installed). For more details on Push Notification, please refer to Appendix A:
Push Notification.
To configure the Motion Detection settings:
1. Click to bring-up the Motion Area Setup page.
a. Select a channel from the Channel drop-down list.
b. Select Enable from the Switch drop-down list to enable motion detection function.
c. To set up motion detection sensitivity level, select a value from the Sensitivity drop-
down list. The higher the value the higher the sensitivity.
d. By default, the whole areas are marked in red. The red blocks represents the areas are
applied with the motion detection function. You can click the mouse and drag it to
draw multiple areas. To clear a certain area, use the same method to draw on the
same area again, the motion area will be erased.
e. To save the settings, right-click the mouse to return to the Motion Setup page and
then click Apply to save the settings.
2. To further set up the motion event notifications, click the Alarm button to enter the
Motion alarm setup page (please refer to 4.3.1 Motion).
3. If you want to activate the motion recording function, you need to configure the recording
schedule. Please refer to 4.2.2.2 Record Schedule.
38
H.265 VANGUARD II Series