Motion - EverFocus ECOR Series Instruction Manual

( % %
feature is selected.
' 6 Check box to record motion events in the log.
the highest. The default is level 5.
"2" (output signal 1 transmits).
< == 6 Check box to enable buzzer when a motion event is detected.
Downloaded from www.Manualslib.com
6 Select the camera you wish to adjust. "Title" will change to the title name of the selected camera.
% 6 Check box to enable motion detection. Other motion options will not be available unless this
( 6 Allows users to adjust motion detection sensitivity. Level 10 is the lowest setting, and level 1 is
6 This will transmit a signal to another device. It can be set to either "
6 Output action when alarm is triggered.
Timeout: Alarm output lasts for the set time duration.
Permanent: Alarm will remain on until user presses "' ( " key on front panel.
6 Time duration selectable from 0 to 150 seconds.
6 Check box to send email notification function when a motion event is detected.
manuals search engine
Figure 5.6 (Camera Menu – Motion)
37
" (not activated) or