Epson S1D13704 Technical Manual page 217

Epson Research and Development
Vancouver Design Center
Program Messages
13704PLAY Diagnostic Utility
Issue Date: 01/02/08
ERROR: Too many devices registered.
There are too many display devices attached to the HAL. The HAL currently can manage only one
device.
ERROR: Could not register 13704 device.
A 13704 device was not found at the configured addresses. Check the configuration address using
the 13704CFG configuration program.
WARNING: Did not detect 13704.
The HAL did not detect an S1D13704, however 13704PLAY will continue to function.
*
Page 7
S1D13704
X26A-B-005-03