Epson S1D13704 Technical Manual page 207

Epson Research and Development
Vancouver Design Center
13704VIRT
S1D13704 Supported Evaluation Platforms
Installation
13704VIRT Display Utility
Issue Date: 01/02/08
13704VIRT demonstrates the virtual display capability of the S1D13704. A virtual display
is where the image to be displayed is larger than the physical display device. The display
surface is used a viewing window. The entire image can be seen only by panning and
scrolling.
13704VIRT must be configured to work with each different hardware platform. Consult
documentation for the program 13704CFG.EXE which can be used to configure
13704VIRT.
This software is designed to work with a variety of embedded and personal computer (PC)
environments. For embedded environments the model employed is that of host/target. It is
assumed that the system has a means of downloading software from the host to the target
platform. Typically this is done by a serial communication link. Alternative methods
include EPROM, parallel port connection or network connection. It is beyond the scope of
this document to provide support for target/host configurations.
13704VIRT has been tested with the following S1D13704 supported evaluation platforms:
• PC system with an Intel 80x86 processor.
• M68332BCC (Business Card Computer) board, revision B, with a Motorola MC68332
processor.
• M68EC000IDP (Integrated Development Platform) board, revision 3.0, with a Motorola
M68EC000 processor.
• SH3-LCEVB board, revision B, with an Hitachi SH-3 HD6417780 processor.
If the platform you are using is different from the above, please see the S1D13704
Programming Notes and Examples manual, document number X26A-G-002-xx.
PC platform: copy the file 13704VIRT.EXE to a directory that is in the DOS path on your
hard drive.
Embedded platform: download the program 13704VIRT to the system.
*
Page 3
S1D13704
X26A-B-004-02