Epson S1D13704 Technical Manual page 201

Epson Research and Development
Vancouver Design Center
13704SPLT
S1D13704 Supported Evaluation Platforms
Installation
13704SPLT Display Utility
Issue Date: 01/02/08
13704SPLT demonstrates S1D13704 split screen capability by showing two different areas
of display memory on the screen simultaneously.
Screen 1 memory is located at the start of the display buffer and is filled with horizontal
bars. Screen 2 memory is located immediately after Screen 1 in the display buffer and is
filled with vertical bars. On either user input or elapsed time, the line compare register value
is changed to adjust the amount of display area taken up by each screen.
13704SPLT must be configured to work with each different hardware platform. Consult
documentation for the program 13704CFG.EXE which can be used to configure
13704SPLT.
This software is designed to work with a variety of embedded and personal computer (PC)
environments. For embedded environments the model employed is that of host-target. It is
assumed that the system has a means of downloading software from the host to the target
platform. Typically this is done by a serial communication link. Alternative methods
include EPROM, parallel port connection or network connection. It is beyond the scope of
this document to provide support for target/host configurations.
13704SPLT has been tested with the following S1D13704 supported evaluation platforms:
• PC system with an Intel 80x86 processor.
• M68332BCC (Business Card Computer) board, revision B, with a Motorola MC68332
processor.
• M68EC000IDP (Integrated Development Platform) board, revision 3.0, with a Motorola
M68EC000 processor.
• SH3-LCEVB board, revision B, with an Hitachi SH-3 HD6417780 processor.
If the platform you are using is different from the above, please see the S1D13704
Programming Notes and Examples manual, document number X26A-G-002-xx.
PC platform: Copy the file 13704SPLT.EXE to a directory that is in the DOS path on your
hard drive.
Embedded platform: Download the program 13704SPLT to the system.
*
Page 3
S1D13704
X26A-B-003-02