Epson RC700 Manual page 7

Control System Configuration
This option is used with the following combinations of Controllers and software.
TYPE A:
TYPE B: Robot Controller RC90 with the following label attached.
TYPE C:
NOTE

NOTE

NOTE

RC700 / RC90 Option Fieldbus I/O Rev.12
Controller
RC700 EPSON RC+ 7.0
Label
Before Ver.7.0.1
EPSON RC+ 7.0
Ver.7.0.2 or later
OK: Compatible All functions of the EPSON RC+ 7.0 and the Controller are
available.
!!!: Compatible Connection is OK. We recommend using EPSON RC+7.0 Ver.
7.0.2 or later.
Manipulator
T series EPSON RC+ 7.0
Ethernet/IP, PROFINET, and EtherCAT of this option are not available for Robot
Controller RC90 (EPSON RC+ 5.0) without the label.
Refer to the Robot Controller RC90 Setup & Operation 13.3 Fieldbus I/O Board.
Manual PDF for TYPE B is available from EPSON RC+ 7.0 Ver. 7.0.2.
Electronic information file for TYPE B is available from EPSON RC+ 7.0 Ver. 7.0.2.
Fieldbus I/O supports the following OS.
Windows XP Professional Service Pack 3
Windows Vista Business Service Pack 2
Windows 7 Professional Service Pack 1
Windows 8.1 Pro
Windows 10 Pro
Software
Controller
RC90
Software
Software
EPSON RC+ 7.0
RC90 controller firmware
Ver.7.0.2.0
!!!
OK
v