Ethernet/Ip; Overview Of Ethernet/Ip; Features Of Ethernet/Ip - Epson RC700 Manual

Robot controller fieldbus i/o
Hide thumbs Also See for RC700:
Table of Contents

Advertisement

1. Introduction

1.4 EtherNet/IP

EtherNet/IP is a fieldbus network that provides easy interconnection between control
devices (PLC, PC, sensor, actuator, etc.).
EtherNet/IP was developed by Allen-Bradley as an open communication standard to
connect various field devices (sensor, actuator, robot controller, etc.). Because of the open
communication standard, EtherNet/IP users can easily construct a multi-vendor system
with various devices developed around the world.
Motor Driver
Motor Driver
from Company A
from Company B
Compared with parallel wiring, EtherNet/IP employs a standard Ethernet cable which
substantially reduces the number of necessary wires, wiring time and cost.
Detachable communication connectors provide you with simple wiring between nodes and
easy network separation or reconstruction.
Specified environment-resistance cables allow you to construct an environment-resistant
system at low cost.
NOTE
You can use the general Ethernet hub or Ethernet switch for EtherNet/IP.
However, be sure to use a product complying with the industrial standards or a noise-
resistant Ethernet cable (STP cable). If you use an office use product or UTP cable, it
may causes communication errors and may not offer the proper performance.
Due to an open communication standard, various devices from many manufacturers are
available.
construction.
Maintenance spare parts stored on site (factory, etc.) can be reduced because different
manufacturers' devices can be used in case of a breakdown. Similar products are available
around the world due to a global standard EtherNet/IP.
8

1.4.1 Overview of EtherNet/IP

Intelligent I/O
from Company C

1.4.2 Features of EtherNet/IP

Reduced Wiring
Open Standard (Multi-vendor)
Standardized communication connectors provide you with easy network
Master Device
Ethernet/IP Network
Photo Sensor
from Company E
Intelligent I/O
from Company D
RC700 / RC90 Option Fieldbus I/O Rev.12
Analog Device
from Company G
HMI Device
from Company F

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rc90

Table of Contents