Epson RC700 Manual page 262

4. Troubleshooting (PROFIBUS DP)
Verifying the PROFIBUS DP network condition
The applicomIO Console application has the following functions:
(1) Select the [Network Detection] tab in the left center of the applicomIO Console
(2) Click the <Online Action> icon. The [Network Monitor] dialog box appears.
252
Network Monitor function
Diagnostic function
application.
You can check the conditions of the following errors on this dialog.
Token Error
Frame Error
When an error occurs on the network, it is added to the corresponding error counter.
: Monitoring error condition detected on the network
: Network diagnosis
Address Error Timeout Error
Network Cycle Bus Fault
RC700 / RC90 Option Fieldbus I/O Rev.12