Epson RC700 Manual page 121

Master Mode
1.
2.
1.
4.
5.
6.
RC700 / RC90 Option Fieldbus I/O Rev.12
Check that the EtherNet/IP master board is connected to the EtherNet/IP network.
Start <applicomIO Console> application.
The [applicomIOR console] dialog box appears. Register the device information
(EDS file) that is necessary for the network setup.
(6)
(5)
Select "Protocol".
Select the [Equipment Library] tab.
Click the <Add> icon.
(4)
2. Installation
111