Epson RC700 Manual page 43

Master Mode
1.
2.
3.
4.
5.
6.
7.
RC700 / RC90 Option Fieldbus I/O Rev.12
Check that the DeviceNet master board is connected to the DeviceNet network.
Open the <applicomIO Console> install folder and run the <console.exe> application.
Following is specified for <applicomIO Console> install folder as default.
C:\Program Files(x86)\BoadCommunications\applicomIO\4.1
The [applicomIOR console] dialog box appears. Register the device information
(EDS file) that is necessary for the network setup.
(5)
(4)
Select [Protocol].
Select the [Equipment Library] tab.
Click the <Add> icon.
The [Select configuration files] dialog box appears.
Specify the EDS file that is supplied by the device manufacturer. Click <Open>.
(3)
2. Installation
33