Epson RC700 Manual page 12

1. Introduction
You can also add the Fieldbus slave function by installing the Fieldbus slave board to the
Robot Controller. Each type of Fieldbus supports the following boards.
DeviceNet slave board
PROFIBUS-DP slave board
EtherNet/IP slave board
CC-Link slave board
PROFINET slave board
EtherCAT slave board
You can install one Fieldbus slave board per controller.
One Fieldbus master board and one Fieldbus slave board of different Fieldbus types can be
used together.
2 RC700 / RC90 Option Fieldbus I/O Rev.12