Creating And Changing A Program - DURKOPP ADLER 275 Series Operating Instructions Manual

58
3. Press the button
 The LED above the button goes out.
The program selection function exits.
The selected program is activated.
5.1.9

Creating and changing a program

All changes to sequences and programs are immediately adopted
and are save on the transition to the next step.
To create or change a program:
1. Set the desired program number ( p. 57).
2. Make the desired settings.
3. Change to next step.
 The settings are now saved.
.
Operating Instructions 275 - 02.0 - 08/2019
Programming