Seam Programs And Seam Sequences; Creating A New Seam Program - DURKOPP ADLER 911-211-10 Operating Instructions Manual

Programming

5.10 Seam programs and seam sequences

5.10.1 Creating a new seam program

New seam programs are created using a Teach-In procedure.
Individual seam paths with specific sewing parameters are defined via the
control panel in order to do this.
To create a new seam program:
1. Press the menu items
 The Teach-In window appears.
Fig. 37: Creating a new seam program
(1) - Cursor position
(2) - Cursor
(3) - Arrow buttons
(4) - OK button: Accept
Defining the starting point (shown by example of the 911-211-3020-10)
2. Define the starting point:
Method
Using the arrow buttons (3)
Caution
For safety reasons, you cannot use the arrow buttons (3)
to select a position beyond 90.1 or -92.6 on the Y-axis.
Settings beyond these coordinates require that you use
the pedal.
Using the pedal
Every press of the pedal moves the cursor (2) by 0.1 in the
direction of the selected axis (X or Y)
Entering coordinates directly via the cursor position (1)
Operating Instructions 911-211-10 - 00.0 - 10/2020
File
①
②
③
New Seam program
> >
(5) - Save button
(6) - Delete button
(7) - Parameter button
(8) - Line selection buttons
Coordinate area
X -150 to X 230
Y 90.1 to Y -92.6
X -150 to X 230
Y 100 to Y -100
X -150 to X 230
Y 100 to Y -100
.
⑧
⑦
⑥
⑤
④
53