Setup
Operating Instructions 827/827-M - 01.0 - 02/2019
7.4
Tabletop
Ensure that the tabletop has sufficient load-bearing capacity and
strength. If you want to make your own tabletop, use the dimen-
sions given in the diagram Appendix ( p. 105) as a template.
7.4.1
Completing the tabletop
Fig. 30: Completing the tabletop
①
②
③
(1) - Sewing lamp transformer
(2) - Drawer
(3) - Setpoint device
(4) - Knee button
To complete the tabletop:
1.
Flip the tabletop (8) over.
2.
Tighten the cable duct (7).
3.
Tighten the power supply (5).
4.
Tighten the knee button (4).
5.
Tighten the setpoint device (3).
6.
Tighten the drawer (2) and brackets.
7.
Tighten the sewing lamp transformer (1).
⑧
④
⑤
(5) - Power supply
(6) - Motor control
(7) - Cable duct
(8) - Tabletop
⑦
⑥
67