Measure:area; Measure:clear - Rigol DS4000E Series Programming Manual

Chapter 2 Command System
Parameter
Name Type
<chan> Discrete
Remarks
You can perform the all measurement function on one or multiple channels among CH1-CH4 and MATH at
the same time.
Return Format
The query returns the source channel(s) (CHAN1, CHAN2, CHAN3, CHAN4, or MATH) in strings. These
source channels are separated by commas.

:MEASure:AREA

Syntax
:MEASure:AREA <area>
:MEASure:AREA?
Description
Sets or queries the measurement range.
Parameter
Name Type
<area> Discrete
Remarks
SCReen: indicates the screen area.

CREGion: indicates the cursor area. The measurement range is specified by the area between Cursor A

(refer to the :MEASure:CREGion:CAX command) and Cursor B (refer to the :MEASure:CREGion:CBX
command).
Return Format
The query returns SCR or CREG.

:MEASure:CLEar

Syntax
:MEASure:CLEar <item>
Description
Clears any one or all of the 5 measurement items that have been turned on last time.
Parameter
Name Type
<item> Discrete
Remarks
The 5 measurement items turned on last time are determined by the order in which you turned them

on (the last item turned on is ITEM5), and they will not be affected if you delete one or multiple
measurement items.
You can use the :MEASure:RECover command to recover the measurement items that have been

cleared.
DS4000E Programming Guide
Range
{CHANnel1|CHANnel2|CHANnel3|CHANnel4|MATH}
Range
{SCReen|CREGion}
Range
{ITEM1|ITEM2|ITEM3|ITEM4|ITEM5|ALL}
RIGOL
Default
CHANnel1
Default
SCReen
Default
--
2-117