Measure:counter:value; Measure:clear; Measure:recover - Rigol MSO1000Z Series Programming Manual

Chapter 2 Command System

:MEASure:COUNter:VALue?

Syntax :MEASure:COUNter:VALue?
Description Query the measurement result of the frequency counter. The default unit is Hz.
Return The query returns the measurement result in scientific notation. If the frequency counter
Format is disabled, 0.0000000e+00 will be returned.
Example :MEASure:COUNter:VALue?
Related :MEASure:COUNter:SOURce
Command

:MEASure:CLEar

Syntax :MEASure:CLEar <item>
Description Clear one or all of the last five measurement items enabled.
Parameter
Name
<item>
Explanation You can use the

37 waveform parameters. Note that the last five parameters are determined
according to the order in which you turned them on and they will not change as you
delete one or more measurement items.
You can send the

item or all the items are cleared.
Example :MEASure:CLEar ITEM1

:MEASure:RECover

Syntax :MEASure:RECover <item>
Description Recover the measurement item which has been cleared.
Parameter
Name
<item>
Explanation You can use the

37 waveform parameters. Note that the last five parameters are determined
according to the order in which you turned them on and they will not change as you
delete one or more measurement items.
You can send the

of the measurement items are recovered.
MSO1000Z/DS1000Z Programming Guide
/*The query returns 1.000004e+03*/
Type Range
Discrete {ITEM1|ITEM2|ITEM3|ITEM4|ITEM5|ALL}
:MEASure:ITEM
:MEASure:RECover
/*Clear ITEM1*/
Type Range
{ITEM1|ITEM2|ITEM3|ITEM4|ITEM5|ALL}
Discrete
:MEASure:ITEM
:MEASure:CLEar
command to enable the desired parameters of the
command to recover the item(s) when a certain
command to enable the desired parameters of the
command to clear the items again after one or all
RIGOL
Default
--
Default
--
2-117