7
UTILITY PACKAGE (SW1DNC-EIPUTL-E)
7.9
"Setting" Tab (Parameter Settings)
This section describes the "Setting" tab where the EtherNet/IP module is configured.
When multiple EtherNet/IP modules are connected to one CPU module, settings can be
performed simultaneously for four modules per project.
When making the settings, first add the information of the EtherNet/IP module under
"[Own Nic]" in the "Basic" window.
7.9.1
Make the following settings.
7
- 31
7.9 "Setting" Tab (Parameter Settings)
7.9.1 "Basic" window
"Basic" window
• Settings for the parameters to operate the EtherNet/IP module (start I/O No. and
IP address)
Figure 7.20 "Basic" window