Chapter 6 Parameter; Parameter List And Setting Method - Mitsubishi Electric MELSEC Q Series User Manual

6
PARAMETER

CHAPTER 6 PARAMETER

This chapter describes parameters of the EtherNet/IP module.
6.1

Parameter List and Setting Method

(1) Parameter list and setting method
PARAMETER
IP Address
Common Parameter
Class1 Tag Parameter
Class3/UCMM Tag Parameter
Refresh Parameter
Intelligent function module detailed
setting
IP Address
Common Parameter
Class1 Tag Parameter
Class3/UCMM Tag Parameter
Refresh Parameter
Intelligent function module detailed setting
6
- 1 6.1 Parameter List and Setting Method
1) Set the following parameters.
Table 6.1 Parameter list and setting method
Set the IP address of the EtherNet/IP module.
Set the following items when changing values from default.
•Maximum count of tags
•Size of the Input Area (Un\G0 to Un\G8191)
•Size of Output Area (Un\G8192 to Un\G16383)
Set tags for Class1 Tag communication.
Set tags for Class3 and UCMM Tag communication.
Specify the devices where the communication status and own
station error are stored.
Set the Tag communication status for a CPU stop error.
Table 6.2 Whether the setting is required for each Tag communication
Parameter
: Setting required
2) Write parameters to the module. (
3) Power off and then on the programmable controller, or reset the QCPU.
Description
Class1 Tag
communication
: Setting required as necessary,
Section 7.10 Online)
Reference
Set from:
Section 7.9.1
Section 4.2.1
Utility Package
Section 7.9.2
Section 4.2.2
Section 4.2.3
Section 7.9.4
Section 7.9.7
Section 4.3
GX Works2
Section 5.5.1
Function
Class3 Tag UCMM Tag
communication communication
: No setting required
section