Download  Print this page

Mitsubishi Electric MELSEC Q Series User Manual Page 194

Ethernet/ip network interface module for programmable controller.
Hide thumbs

Advertisement

7
UTILITY PACKAGE (SW1DNC-EIPUTL-E)
Item
Producer List
TAG TYPE
TAG SIZE
Connection Time
Disconnection Time
Connection Count
Connected Consumer
Related Consumer
Tag name
IP Address
Destination IP Address
OT RPI
TO RPI
OT Timeout
TO Timeout
OT API
TO API
OT Connection ID
TO Connection ID
Consumer List
TAG TYPE
TAG SIZE
Connection Time
Disconnection Time
IP Address
Related Producer
Tag name
Destination IP Address
OT RPI
TO RPI
OT Timeout
TO Timeout
OT API
TO API
OT Connection ID
TO Connection ID
7
- 67
7.11 "Monitoring" tab (Network Diagnostics)
Table 7.33 "Connection" window items
The details of the Producer Tag/Message Tag that have been registered in the EtherNet/IP module
are displayed.
The type of the Tag (Class1/Class3/UCMM) is displayed.
The size of the Tag is displayed in INT units.
The communication start time of the Producer Tag/Message Tag is displayed.
The communication end time of the Producer Tag/Message Tag is displayed.
The maximum number of Consumer Tags that can communicate with the Producer Tag/Message
Tag is displayed.
The number of Consumer/Message Tags that is communicating with the Producer Tag/Message
* 1 * 4
Tag is displayed.
The details of the communication destination Tag (Consumer Tag/Message Tag) are displayed.
The communication destination Tag name is displayed.
The Multicast Address of the Producer Tag/Message Tag is displayed.
The IP address of the communication destination Tag is displayed.
The RPI from Originator to Target with the communication target Tag is displayed.
The RPI from Target to Originator with the communication target Tag is displayed.
The time-out value from Originator to Target with the communication target Tag is displayed.
The time-out value from Target to Originator with the communication target Tag is displayed.
The API from Originator to Target with the communication target Tag is displayed.
The API from Target to Originator with the communication target Tag is displayed.
The Connection ID from Originator to Target with the communication target Tag is displayed.
The Connection ID from Target to Originator with the communication target Tag is displayed.
The details of the Consumer Tag/Message Tag that have been registered in the EtherNet/IP
module are displayed.
The type of the Tag (Class1/Class3/UCMM) is displayed.
The size of the Tag is displayed in INT units.
The communication start time of the requested Tag is displayed.
The communication end time of the requested Tag is displayed.
The IP address of the Producer Tag/Message Tag is displayed.
The details of the communication destination Tag (Producer Tag/Message Tag) are displayed.
The communication destination Tag name is displayed.
The IP address of the communication destination tag is displayed.
The RPI from Originator to Target with the communication target Tag is displayed.
The RPI from Target to Originator with the communication target Tag is displayed.
The time-out value from Originator to Target with the communication target Tag is displayed.
The time-out value from Target to Originator with the communication target Tag is displayed.
The API from Originator to Target with the communication target Tag is displayed.
The API from Target to Originator with the communication target Tag is displayed.
The Connection ID from Originator to Target with the communication target Tag is displayed.
The Connection ID from Target to Originator with the communication target Tag is displayed.
* 1 "-" is displayed when Tag communication start process completion (X00) is not on.
* 2 "0000/00/00 00:00:00" is displayed when there has not been a single normal communication
since Tag communication start process completion (X00) was turned on.
* 3 "0000/00/00 00:00:00" is displayed when there has not been a single abnormal communication
since Tag communication start process completion (X00) was turned on.
* 4 "0" is displayed when there has not been a single normal communication since Tag
communication start process completion (X00) was turned on.
* 5 "0.0.0.0" is displayed when there has not been a single normal communication since Tag
communication start process completion (X00) was turned on.
* 6 "00000000" is displayed when there has not been a single normal communication since Tag
communication start process completion (X00) was turned on.
Description
* 1 * 5
* 1 * 5
* 1 * 2
* 1 * 3
* 1
* 1
* 1
* 1 * 2
* 1 * 3
* 1 * 4
* 1 * 4
* 1 * 4
* 1 * 4
* 1 * 4
* 1 * 4
* 1 * 6
* 1 * 6
* 1 * 4
* 1 * 4
* 1 * 4
* 1 * 4
* 1 * 4
* 1 * 4
* 1 * 6
* 1 * 6

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric MELSEC Q Series

This manual is also suitable for:

Qj71eip71

Comments to this Manuals

Symbols: 0
Latest comments: