Mitsubishi Electric MELSEC Q Series User Manual page 160

7
UTILITY PACKAGE (SW1DNC-EIPUTL-E)
(1) Display and settings of the "Add Own Nic" window
Item
Start I/O No.
Nic Name
IP Address Setting
DHCP
IP Address
Subnet Mask
Default Gateway
7
- 33 7.9 "Setting" Tab (Parameter Settings)
7.9.1 "Basic" window
Figure 7.21 "Add Own Nic" window
Table 7.15 "Add Own Nic" window items
Set the start I/O No. of the EtherNet/IP module. (Hexadecimal)
Set the name of the EtherNet/IP module. (Up to 40 one-byte alphanumeric characters)
Configure the settings that are required for the network connection of the EtherNet/IP module.
Select to enable or disable the DHCP client function.
Not Use: disabled (default)
Use: enabled
Set the IP address of the EtherNet/IP module.
Set the IP address in the range below.
0.0.0.1 to 126.255.255.254
128.0.0.1 to 191.255.255.254
192.0.0.1 to 223.255.255.254
Exclude *.0.0.0 and *.255.255.255.
Set the subnet mask.
Set the IP address of the default gateway.
Description