Download  Print this page

Project File; Creating A New Project - Mitsubishi Electric MELSEC Q Series User Manual

Ethernet/ip network interface module for programmable controller.
Hide thumbs

Advertisement

7
UTILITY PACKAGE (SW1DNC-EIPUTL-E)
7.7

Project File

This section describes how to operate project files.
7.7.1

Creating a new project

The following procedure shows how to create a new project.
1) Click [File] [New].
The "Main" tab is displayed.
2) Clicking the "Setting" tab will display the "Basic" window below.
Make settings for [Own Nic], referring to the explanations below.
Section 7.9.1 (1) Display and settings of the "Add Own Nic" window
Figure 7.13 Project of Utility Package
3) Complete Tag Parameter and Refresh Parameter by setting the following
items.
• Class1 Tag Parameter setting (
of the "Producer Tag" window, Section 7.9.3 (2) Display and settings of the
"Consumer Tag" window)
• Class3/UCMM Tag Parameter setting (
settings of the "Message Tag" window)
• Setting Refresh Parameter (
window)
Section 7.9.2 (2) Display and settings
Section 7.9.4 (2) Display and
Section 7.9.7 "Refresh Parameter"
7.7 Project File
7.7.1 Creating a new project
1
2
3
4
5
6
7
8
7
- 24

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric MELSEC Q Series

This manual is also suitable for:

Qj71eip71

Comments to this Manuals

Symbols: 0
Latest comments: