Mitsubishi Electric MELSEC Q Series User Manual page 190

7
UTILITY PACKAGE (SW1DNC-EIPUTL-E)
(2) "Consumer" window
Item
/ button
Start Monitoring Stop Monitoring
Monitoring/Stop
Tag status monitor
Nic No.
Tag Name
State
Size
Type
Connection Time
Tag Data View
7
- 63 7.11 "Monitoring" tab (Network Diagnostics)
Figure 7.36 "Consumer" window
Table 7.31 "Consumer" window items
Monitoring is started or stopped in the "Consumer" window.
The monitoring status is displayed.
•"Monitoring ● (green)": Monitoring
•"Stop ● (red)": Monitoring stopped
The status of the Consumer Tag that has been registered in the EtherNet/IP module is displayed.
Nic No. is displayed.
The Tag name that has been configured in the EtherNet/IP module is displayed.
The status of the Tag is displayed.
•● (green): Normal communications
•● (red): Abnormal communications
The size of the Tag is displayed.
The type of the Tag is displayed.
The communication start time and communication end time (year, month, day, hour, minute, and
second) are displayed.
•During normal communications: Communication start time
•During abnormal communications: Communication end time
The times are not displayed in the following cases.
•Blank when Tag communication start process completion (X00) is not on.
•"0000/00/00 00:00:00" is displayed when there has not been a single normal communication since
Tag communication start process completion (X00) was turned on.
The data of the selected Consumer are displayed in the format selected below.
Description