Mitsubishi Electric MELSEC Q Series User Manual page 201

8
PROGRAMMING
(2) System 2 (192.168.0.2) setting
Use the default settings except for the following settings.
(a) IP address and Common Parameter setting
(b) Connected device setting
Make settings in the "Add Own Nic" window as shown below.
Figure 8.11 Setting in the "Add Own Nic" window for System 2
Make settings in "[Remote Nic]" in the "Basic" window as shown below.
Figure 8.12 Setting in the "Basic" window for System 2
8.3 Parameter Setting
1
2
3
4
5
6
7
8
8
- 6