7
UTILITY PACKAGE (SW1DNC-EIPUTL-E)
(1) For Windows
(End)
7
- 11
7.2 Installing and Uninstalling
7.2.3 Installing USB driver
XP
The following is the installation procedure of USB driver on Windows
(Start)
1.
Connecting a personal computer and QCPU with a USB cable
displays the window shown on the left.
Select "Install from a list or specific location [Advanced]" and
click
.
Next
2.
Select "Search for the best driver in these locations".
Check "Include this location in the search:" and specify the
"EZSocket\Easysocket\USBDrivers" where Utility Package is
installed, and click the
3.
Click the
Continue Anyway
No action is required for the message shown on the left since
the operation using USB driver on Windows
tested by Mitsubishi.
No problem should occur after installing USB driver.
4.
The installation is completed when the window shown on the
left is displayed.
Finish the installation by clicking
XP.
button.
Next
button.
XP has been
.
Finish