UTILITY PACKAGE (SW1DNC-EIPUTL-E)
The following shows how to find and open an existing project.
7.7 Project File
7.7.2 Opening a project
Opening a project
1) Click [File] [Open].
The "Open" window is displayed.
2) Select the items listed in the Table 7.11 and click
Files of type
3) A project of Utility Package is displayed. (
Figure 7.14 "Open" window
Table 7.11 Setting items in the "Open" window
Select the location of the existing project.
Select the project file name to open.
Select the project file type.
Section 7.5 Window Structure)