Mitsubishi Electric MELSEC Q Series User Manual page 184

7
UTILITY PACKAGE (SW1DNC-EIPUTL-E)
Item
Download
7
- 57 7.10 Online
7.10.2 Writing parameters to the EtherNet/IP module
Table 7.27 Description of the "Download Parameter" window (Continued)
Writes the parameters to the EtherNet/IP module.
Item
button
All Select
button
Clear
Refresh Parameter
Nic No.1 to 4 IP Address
Nic No.1 to 4 Tag
Parameter
button
Download
button
Cancel
Description
Description
All checkboxes are selected.
All checkboxes are cleared.
When they are selected, the settings made in the
"Refresh Parameter" window are written in the
CPU module.
The IP address data that have been set in the
"Add Own Nic" window are written into the
EtherNet/IP modules with the selected Nic Nos.
The settings made on the "Setting" tab are written
into the EtherNet/IP modules with the selected Nic
Nos.
The selected parameters are written into their
respective EtherNet/IP modules.
Clicking the button deletes the settings of the
"Download Parameter".
Reference
section
-