Mitsubishi Electric MELSEC Q Series User Manual page 169

7
UTILITY PACKAGE (SW1DNC-EIPUTL-E)
(2) Display and settings of the "Consumer Tag" window
Item
Nic Select an Own Nic No.
Set the tag name.
Tag Name
Up to 100 one-byte alphanumeric characters can be used.
label)
When the "Label (for GX Works2) Setting Enable" checkbox in the "Add Own Nic" window is selected, the Tag
GX Works2 Label Name
name set in "Tag Name" is automatically used as it is.
Select one from the following.
"INT": 1 word
Data Type
The Data Type name registered in the "User Define" window (
Set the data size to be received from Producer Tag. (1 to 722 words)
Data Size When selecting a Data Type name that has been registered in "Data Type" of the "User Define" window, the
size of the selected Data Type is automatically set.
Connection Type Fixed to "Class1" for Consumer Tag.
Select the type of the connection.
"Multicast": Select when the connected device (Producer Tag) communicates with multiple Consumer Tags.
Setting Type
(Default)
"Point to Point": Select when the connected device (Producer Tag) communicates with one Consumer Tag.
Set the RPI of Consumer Tag.
Setting range: 5 to 10000 (Default: 5)
RPI
Every RPI of Consumer Tag can be set all at once with "RPI Set" of the selection tree. (
"RPI Set" window)
The Node Name that has been set in "[Remote Nic]" in the "Basic" window appears. Select the connected
Remote Node
device. (
Figure 7.25 "Consumer Tag" window
Table 7.19 "Consumer Tag" window settings
Section 7.9.1 "Basic" window)
7.9 "Setting" Tab (Parameter Settings)
Description
*1
(Up to 32 alphanumeric characters when using a
Section 7.9.5 "User Define" window)
7.9.3 "Consumer" window
1
2
3
4
5
6
7
8
Section 7.9.6
7
- 42